Technical data

Call Handling 25
SBX IP 320 Features & Operation Guide
Operation
To activate LCD Messages (Custom/Pre-selected) from a Station or from the System Attendant:
1. Press the [TRANS/PGM] button.
2. Dial 51.
3. Dial the 2-digit message code 00 or 01-10.
4. Press the [HOLD/SAVE] button.
To cancel LCD Messages (Custom/Pre-selected) from a Station:
1. Press the flashing [DND/FWD] button
-or-
Press the [TRANS/PGM] button.
2. Dial 51 and the desired number.
3. Press the [HOLD/SAVE] button.
Conditions
• If a station assigns call forward while a pre-selected message is activated, the
pre-selected message is canceled automatically).
• Users can leave a message at a DKTU or SLT. When leaving a message at the SLT, a
DND warning tone will sound when the handset is lifted as a reminder of the message
waiting.
• When a pre-selected message is selected in a DKTU, the [DND/FWD] button will flash.
Admin Programming
• Refer to the SBX IP 320 Installation Manual, Numbering Plan (PGM 106)