Technical data

Call Handling 22
SBX IP 320 Features & Operation Guide
To program {Walking COS} on a flexible button:
1. Press the [TRANS/PGM] button.
2. Press the applicable FLEX button.
3. Press the [TRANS/PGM] button.
4. Dial 2 3.
5. Press the [HOLD/SAVE] button to accept changes.
Conditions
• Can be used on DKTUs and SLTs.
• This feature is available on a per-use basis only. While activating walking COS,
hanging-up or pressing the [TRANS/PGM] button to hold the call and seize another line,
the original programmed Station COS will be used.
• When a wrong number is dialed, press the [FLASH] button to dial again without
changing to an idle CO line.
• The fee for a call with Walking COS will be charged according to the Station
authorization code, not the actual Station.
• When a User tries to use Walking COS at a station set to COS 7 with temporary COS, the
call will follow the original COS of the Station.
Admin Programming
• Authorization Code Table (PGM 227)
Call Handling
Absent Text Message
Custom Message
Each station can select from ten (11-20) available custom messages to display on the DKTU
LCD. These messages are programmed by the System Attendant for System-wide use.
Individual users may program message 00 as their own custom message.
When set, the selected message is displayed on the User Station LCD panel.