Technical data

Voice Service 247
SBX IP 320 Features & Operation Guide
• This feature is available in the SMDI mode only, not in the DTMF mode.
• Not available for intercom call recording.
• If the system has a VMIB, the conversation will be recorded to the VMIB.
• If Pole 3 of DIP SW1 of MBU is set to OFF (down position) and system has VMIB, the
conversation will be recorded to the VMIU.
Admin Programming
• Two Way Recording (PGM 112 - FLEX 10)
Two-way Recording via VMIB
This feature allows a station to record a conversation in the mailbox by pressing a {RECORD}
button while the station is talking with a CO party.
Operation
To set a flexible button programmed for 2-way record feature,
1. Press the [TRANS/PGM] button.
2. Press the flexible button to be assigned.
3. Press the [TRANS/PGM] button and dial "54".
4. Press the [HOLD/SAVE] button.
While a station user is in a conversation with a CO line caller, the user presses the {RECORD}
button and the conversation will be recorded in the user's mailbox. The user presses the
{RECORD} button again or hangs up to end the recording.
Conditions
• During the recording feature is enabled, the {RECORD} button will flash at 240 ipm and
if it is disabled, the {RECORD} button will be extinguished.
• Not available to SLT.
• Recording operation is canceled when station goes off-hook, presses the {RECORD}
button again, presses the [FLASH] button, or the CO party hangs up.
• Not available for intercom call recording.
• If the system has an external voice mail system, the conversation will be recorded to the
external voice mail system.
Admin Programming
• Two Way Recording (PGM 112 - FLEX 10)