Technical data

Voice Service 233
SBX IP 320 Features & Operation Guide
• A Direct transfer to a Net number's VM box is not allowed.
Admin Programming
• VMIB Access (PGM 113 - FLEX 2)
Mailbox Buttons
Description
This feature allows station users to assign VM "buttons" to represent specific voice mail boxes
in a system. The user can access his own station's voice mail box to check a new or saved
message. The user can also program mailbox buttons for other mailboxes, that will be used to
check for messages or transfer a caller directly to a mailbox via the use of this button.
Operation
• The user presses TRANS/PGM + FLEX + TRANS/PGM + 47 + XXX (XXX=desired
mailbox button) + HOLD/SAVE to make the Mailbox Button.
• When a new message is left for a mailbox, the mailbox button LED flashes at the rate of
1 flash per 1000 ms. The subscriber can press the button to access the mailbox. This
applies to all mailbox buttons on the user's keyset.
• While on a call, the user can press the preprogrammed mailbox button to transfer the
caller directly to that programmed mailbox.
Conditions
• Each DKTU or IPKTU may have mailbox buttons programmed up to the number of flex
buttons on the phone, i.e. 24 or 8 depending on the type of phone.