Technical data

Attendant Service 10
SBX IP 320 Features & Operation Guide
• Enter Start/End times in PGM 233.
• On-demand mode is not available in the Automatic Ring mode.
• The Attendants of an intercom tenancy group can change the ring mode as well as main
Attendants. If an Attendant of an intercom tenancy group changes the ring mode, only the
ring mode of the intercom tenancy group to which the Attendant belongs is changed. If a
main Attendant changes the ring mode, the ring mode of the system will be changed.
• When the ring mode is set to Automatic Ring mode by the main Attendant, the ring mode
of the system will follow the first table entry (entry number: 00) of the Weekly Time
Table.
• If the system ring mode is changed from the night/weekend/on-demand/auto ring mode to
day mode, the ring mode of all Intercom Tenancy Groups will change to the previous ring
mode.
• The Lunch Mode default Value is not assigned.
• In PGM 144, Weekend mode, Lunch mode, or On-Demand mode, if Ring assigned
destination is Station, Ring Delay Count is enable only 0.
• In Weekly Time Table, if input time is the same (for example, Day Start Time and Lunch
Start Time are the same), the time table cannot work correctly.
Admin Programming
• DISA Attribute (PGM 140)
• CO Line Ring Assignment (PGM 144, PGM 145)
• DID Table (PGM 231)
• Weekly Time Table (PGM 233)
DATE DAY START
TIME
LUNCH
START TIME
LUNCH END
TIME
NIGHT
START TIME
WEEKEND
START TIME
Mon 09:00 -:- -:- 18:00 -:-
Tues 09:00 -:- -:- 18:00 -:-
Wed 09:00 -:- -:- 18:00 -:-
Thurs 09:00 -:- -:- 18:00 -:-
Fri 09:00 -:- -:- -:- 18:00
Sat -:- -:- -:- -:- 00:00
Sun -:- -:- -:- -:- 00:00