Technical data

Paging 179
SBX IP 320 Features & Operation Guide
Conditions
• Lift handset to make a page.
• If there is any recorded message, it is paged and if there is no recorded message, user's
voice is paged.
Admin Programming
• Paging Timeout Timer (PGM 181 - FLEX 10)
SOS Paging
The system allows the recording of multiple VMIB messages for pre-recorded paging. A
recorded VMIB message can be paged to a page zone in an emergency.
Operation
To assign {VMIB SOS Paging} at a flexible button:
1. Press the [TRANS/PGM] button.
2. Press the FLEX button to assign.
3. Dial paging code (5xx).
4. Dial Message number (001-070).
5. Press the [HOLD/SAVE] button.
To activate VMIB SOS paging:
Press the assigned {VMIB SOS Paging} flexible button.
Conditions
• This feature can be only activated by pressing an assigned flexible button on a DKTU in
an idle state.
• The VMIB message for SOS Paging can be recorded only at an Attendant station.
• Paging zones include internal, external, and all call paging area.
• VMIB SOS paging is not restricted by VMIB Paging timer. The whole VMIB SOS
paging can be paged even though Paging Timeout timer expires.