Technical data

Internet Protocol (H.450) 131
SBX IP 320 Features & Operation Guide
To delete the current CLI Message and see the next one:
1. Press the [CONF] button.
2. The current MWI message will be deleted; a confirmation tone sounds, and the next
MWI message will be displayed.
To place a Call Back from a MWI:
1. Retrieve the MWI by pressing the flashing [CALLBK] button, and using the volume
up/down buttons.
2. Press [HOLD/SAVE] button. The System will attempt to connect a net call according to
MWI data.
Conditions
• The MWI feature is available on Stations with a LCD panel only.
• When the System makes a call back according to MWI data, the CO line is selected
within the Network CO group.
Admin Programming
• CLI Message Wait (PGM 114)
• Networking Basic Attribute (PGM 320)
• Networking CO Line Attribute (PGM 322)
• Networking Routing Table - Numbering Plan (PGM 324)