Technical data

Incoming Call Pickup 105
SBX IP 320 Features & Operation Guide
Voice Mail Group
This group is assigned for voice mail and only SLTs can be assigned as members of this Hunt
group. When the VM group is called, the system will search for an idle member in the calling
VM group with Terminal type or Circular type hunting.
Incoming Call Pickup
CO Line Name
This feature allows the capability to name each CO Line. Stations with an LCD interface screen,
including the Attendant Station, will display the programmed CO Line Name in place of the
default "LINE XXX" display.
Conditions
• This applies to all conditions where the LINE XXX message is displayed. However,
SMDR will display the line number in place of the programmed name.
• A CO Line Name can be assigned to each CO Line.
• Each CO Line Name can contain up to 12 characters.
• If the CO Line Name Display is set to OFF at PGM 142 - FLEX 1 selected, the CO Line
Name is not displayed even if the name is programmed.
Admin Programming
• CO Line Name Display (PGM 142 - FLEX 1)
• CO Line Name Assignment (PGM 142 - FLEX 2)