User guide

Network Configuration B-2
Appendix B: IP PHONE SETUP
MBX IP Station User Guide
Network Configuration
The User can review the current network configuration or modify a new phone network
configuration.
To access Network Config. settings:
1. Press [MENU] button and 2 (Network Config),
2. Enter the password (default=147*); the following will display:
3. Press the # key to toggle between multiple profiles (MFIM),
4. Press the [VOL Up/Down] buttons to advance to the next network configuration item,
5. Press the [HOLD/SAVE] button to save each setting.
To set default Config. settings:
1. In Network Config. Menu, use [VOL Up/Down] buttons to locate the Default Config.
Screen (shown), "SET DEFAULT CONFIG(DOT:*)",
2. Press the * key.
To exit Config. settings:
1. Press the [SPEAKER] button,
2. Press the * key to exit, or
3. Press the # key to Reset/Reboot the phone with new setting.
Using the Speakerphone
Activate the MBX IP Speakerphone at any time (except for Paging) in place of lifting the handset
to receive or place calls.
Additionally, you may switch between the handset and Speakerphone during a call. By keeping
the handset Off-hook, the Group Listen feature is activated, which provides incoming audio
over the speaker with outgoing audio from the handset. This permits a local 'group' to listen to
both sides of the conversation without interfering with the conversation.
While in a conversation using the Speakerphone, Mute the microphone using the [MUTE]
button. When Mute is active, the [MUTE] button LED will be illuminated. To turn off Mute, press
the [MUTE]button again.
With Auto Speaker Select, activating or accessing a feature by pressing its button will activate
the Speakerphone automatically.
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
Release 1.0
November 2010