Installation guide

Pre-Installation 3-13
Chapter 3: KSU Installation
MBX IP Hardware & Installation Guide
KSU Mounting
Wall Mounting
1. Attach the mounting template for accurate placement to the wall and drill the hole.
2. Install 12 anchor plugs into the wall using the mounting template shown below.
3. Insert 12 included screws into the 12 anchor plugs.
4. Hook Wall Bracket onto installed screws.
5. Attach Wall Shelf to the bottom of KSU and affix 2 shelves to the KSU using the 8
screws provided.
6. Hook the Wall Shelf onto the Wall Bracket, make sure the System slides down seurely.
7. Affix the Wall Shelf to the Wall Bracket using the 8 screws provided.
CONNECTOR TYPE PIN NUMBER BOARD REMARK
Audio Jack MPB EXT MOH Port EXT
PAGE Port
Release 1.7
April 2012