Installation guide

Basic Preprogramming 7-16
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
Range of Station
To edit Station Range:
1. Press the [Trans/PGM] button.
2. Dial 112 (Program Number).
3. Press the FLEX1 button.
4. Enter the new Station Range (100-423).
5. Press the [Hold/Save] button.
Station Number Input
To edit Station Number Input:
1. Press the [Trans/PGM] button.
2. Dial 112 (Program Number).
3. Press the FLEX2 button.
4. Enter the Index (001-648).
5. Enter the Station Number
6. Press the [Hold/Save] button.
FEATURE CODE SETTING (PGM 113)
To set the Feature Code, perform the following:
1. Press the [Trans/PGM] button.
2. Dial 113 (Program Number).
3. Enter the Button Number (01-91).
4. Enter the Code.
5. Press the [Hold/Save] button.
Release 1.7
April 2012