Installation guide

Basic Preprogramming 7-14
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
DiffServ
To program the Diffserv:
1. Press the [Trans/PGM] button.
2. Dial 108 (Program Number).
3. Press the FLEX9 button.
4. Enter the Diffserv Number (01-62).
5. Press the [Hold/Save] button.
SYSTEM INFORMATION DISPLAY (PGM 109)
The values presented in this section are for viewing only and cannot be modified.
NOTE: The # key can be used to skip to the next program item.
MAC Address
To view the MAC Address:
1. Press the [Trans/PGM] button.
2. Dial 109 (Program Number).
3. Press the FLEX1 button.
IPKTS Protocol Port
To view the Protocol Port:
1. Press the [Trans/PGM] button.
2. Dial 109 (Program Number).
3. Press the FLEX2 button.
Private Net Mask
To view the Private Net Mask:
1. Press the [Trans/PGM] button.
2. Dial 109 (Program Number).
3. Press the FLEX3 button.
Application Release Version
To view the Application Release Version:
1. Press the [Trans/PGM] button.
2. Dial 109 (Program Number).
3. Press the FLEX4 button.
Release 1.7
April 2012