Installation guide

Basic Preprogramming 7-13
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
DNS IP Address
To program the DNS IP Address:
1. Press the [Trans/PGM] button.
2. Dial 108 (Program Number).
3. Press the FLEX5 button.
4. Enter the appropriate DNS IP Address (up to 12 digits).
5. Press the [Hold/Save] button.
H.323 PORT
To program the H.323 PORT:
1. Press the [Trans/PGM] button.
2. Dial 108 (Program Number).
3. Press the FLEX6 button.
4. Enter the H.323 Port Number (9500-9999).
5. Press the [Hold/Save] button.
SIP PORT (0000 - 9999)
To program the SIP Port:
1. Press the [Trans/PGM] button.
2. Dial 108 (Program Number).
3. Press the FLEX7 button.
4. Enter the SIP Port Number (4 digits, 0000-9999).
5. Press the [Hold/Save] button.
DHCP Usage
To program the DHCP usage:
1. Press the [Trans/PGM] button.
2. Dial 108 (Program Number).
3. Press the FLEX8 button.
4. Enter the DHCP usage (1-ON, 2=OFF).
5. Press the [Hold/Save] button.
Release 1.7
April 2012