Installation guide

Basic Preprogramming 7-7
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
.
6. Board Type Listing
7. Press the FLEX2 button.
8. Enter the logical port number (2 digits, if PRIB is in use logical port assignment may
apply).
9. Press the [Hold/Save] button.
LOGICAL SLOT ASSIGNMENT (PGM 103)
The following items are for programming the logical slot numbers in use.
CO Board
To set the CO Board Slot Number:
1. Press the [Trans/PGM] button.
2. Dial 103 (Program Number).
3. Press the FLEX1 button.
4. Enter the CO Board Slot Number (00-18).
5. Press the [Hold/Save] button.
STA CODE COL CODE ETC. CODE
DSIB 11 VOIU 31 VMIB 51
DTIB12 12 VOIB8 32 AAFU 53
DTIB24 13 VOIB 33
SLIB12 14 LCOB4 34
SLIB24 15 LCOB8 35
WTIB 16 LCOB12 36
DTIM8 17 PRIB 37
SLTM4/8 18
SLTM32 19
Release 1.7
April 2012