Installation guide

Basic Preprogramming 7-6
Chapter 7: Starting the MBX IP System
MBX IP Hardware & Installation Guide
3. Press the FLEX2 button.
4. Enter the appropriate Site name (up to 23 digits, refer to character entry chart).
5. Press the [Hold/Save] button.
Character Entry Chart
SLOT ASSIGNMENT (PGM 101)
The following items are for programming the slot numbers in use.
To set the Slot Number:
1. Press the [Trans/PGM] button.
2. Dial 101 (Program Number).
3. Enter the Slot Number that is being programmed.
4. Press the FLEX1 button.
5. Enter the Board Type code (refer to table)
Release 1.7
April 2012