User guide

Call Log 8-2
Chapter 8: MISC FEATURES
MG IP Station User Guide
The CO code in a log item is used to seize the CO line when placing an external call using the
call log. Up to 5 CO codes can be saved.
The first CO code is sent from the system in the saved call log. Normally the first CO code is
'9', but if the telephone number is equal to a number in the Speed Dial list, the first CO code will
be the access code of the saved CO line of the speed dial. Therefore the first CO code of each
call log can be different and is not editable.
CO Codes 2 - 5 are the user-defined codes. If a code 2 - is selected, the selected code will be
used in placing all of the external calls in the call log.
To select a CO Code:
1. From the Call Log, use the right Navigation key to advance to the next 3 Soft button
items,
2. Press the CO CODE Soft button (code displaying the + symbol is the currently
selected item),
To edit the CO code (positions 2-5 only):
1. Use Navigation up/down buttons to highlight the desired item,
2. Press the Edit Soft button to modify selection.
To select the CO code:
1. Use Navigation up/down buttons to highlight the desired item,
2. Press the Select Soft button.
01. CO1 01112345678
02. 101
03. CO2 JONES K D
DEL CO CODE
1. +88001
2.
3.
BACK EDIT SELECT
CONFIDENTIAL MATERIAL - Do Not Distribute
1.0 Review Draft - 7/7/2010