User guide

Mobile Phone Extension 7-2
Chapter 7: REMOTE SYSTEM ACCESS
MG IP Station User Guide
To place a call from the mobile extension using the MBX System:
1. Dial the ISDN DID number of the station; the system will check the Caller ID and
answer the call. The user then will receive intercom dial tone,
2. Place internal or external MBX call as normal.
To Transfer a call from the mobile extension using the MBX:
1. Dial the mobile flash digit "*" while on an MBX call,
2. Dial the desired extension, the call is transferred and the mobile phone returns to idle.
NOTE: The mobile extension may reconnect to the transfer call by pressing the mobile flash digit (*).
CONFIDENTIAL MATERIAL - Do Not Distribute
1.0 Review Draft - 7/7/2010