User guide

Call Park: Placing a call on Hold to Page 5-4
Chapter 5: CALL HANDLING
MG IP Station User Guide
Call Park: Placing a call on Hold to Page
A user may transfer an active CO/IP call to a special holding location (Park Orbit), which can
be accessed easily from any station in the system. Typically, this feature is used with Paging
to notify the desired user of a parked call.
Parked calls are subject to Hold Recall after the Call Park timer.
To park an active external call:
1. Press TRANS/PGM,
2. Dial the Park Orbit (541),
3. Dial the Park number (00-49),
4. Return to idle.
To retrieve a parked call:
1. Lift the handset,
2. Dial the Park Orbit (541),
3. Dial the Park number (00-49).
Two-Way Record: Recording a call
You may record an active external conversation in your Voice Mail Box.
To activate Two-Way Record while on a CO/IP call:
Use the Navigation button to display the next Menu and select the Record Soft button,
record warning tone is heard and recording starts.
To stop Two-Way Record while on a CO/IP call:
1. Use the Navigation button to display the next menu, and select the Record Soft button
or,
2. Hang-up, return to idle.
CONFIDENTIAL MATERIAL - Do Not Distribute
1.0 Review Draft - 7/7/2010