User guide

Using Dial by Name and Entering Your Name 4-8
Chapter 4: PLACING A CALL
MG IP Station User Guide
To place a call using Dial by Name:
1. Press DIR Soft button,
2. Dial the desired directory, 1: Private directory, 2: Public directory, 3: Intercom directory,
the LCD will display the names in alphabetical order,
3. Scroll using the Navigation up/down keys, or enter search characters (refer to the
Character Entry Chart).
4. Press HOLD/SAVE to place the call.
To enter your station user name:
1. Press the TRANS/PGM button,
2. Dial 12 (Station User Name code),
3. Enter the Name, up to 12 characters (press DND button to backspace/delete a
character). To input characters:
4. Press the second Soft button to select ABC> or abc> mode,
CONFIDENTIAL MATERIAL - Do Not Distribute
1.0 Review Draft - 7/7/2010