User guide

Using Dial by Name and Entering Your Name 4-7
Chapter 4: PLACING A CALL
MG IP Station User Guide
When entering a Speed Dial, a 16 character name may be associated with the number for Dial
by Name. Characters are entered with two keystrokes as in the chart below.
To place a call using Station Speed Dial:
1. Lift the handset, and/or press the DIR Soft button,
2. Dial '1' for station speed,
3. Dial the desired Station Speed Dial bin number (00-19 , 000-099 or 000-049).
To enter a Station Speed Dial number with CO Line and Name:
1. Lift the handset, and/or press the DIR Soft button,
2. Dial '1' for station speed,
3. Press the ADD Soft button,
4. Dial the desired Station Speed Dial bin number,
5. Select/dial the CO/IP line/group,
6. Dial the desired number to be stored,
7. Press HOLD/SAVE,
8. Enter the associated name if desired, using the Character Entry Chart on page
page 3-9,
9. Press HOLD/SAVE.
To assign a Station Speed Dial number directly to a Flex button:
1. Press TRANS/PGM,
2. Press the desired Flex button,
3. Dial '1' for Number,
4. Select/dial the CO/IP line/group,
5. Dial the desired number,
6. Press HOLD/SAVE,
7. Enter the associated name if desired, using the Character Entry chart,
8. Press HOLD/SAVE.
Using Dial by Name and Entering Your Name
Dial by Name employs three different Directories: Private directory (Station Speed dial), Public
Directory (System Speed dial), or Intercom directory.
NOTE: To allow others to contact you via the Intercom directory, you must enter a name for your station
(up to 12 characters).
CONFIDENTIAL MATERIAL - Do Not Distribute
1.0 Review Draft - 7/7/2010