User guide

PLACING CALLS ON HOLD DX Cordless Phone User Guide
- 60 -
HOLDING CALL ANSWER
Holding Call Answer allows you to place a call on hold and retrieve
calls from hold by simply pressing the Hold button. When multiple
calls are holding at an extension, Holding Call Answer accesses the
outside line that has been holding the longest while placing the
current call on hold.
Holding Call Answer works for all outside lines regardless of the
extension outside line button programming. It is possible to handle
calls that do not appear (no button) at an extension via Holding
Call Answer.
When one or multiple calls are holding at your extension:
1) Press Hold to connect to the call that has been on hold
the longest.
2) Press Hold again to place this call on hold again.
3) Press Hold a third time to answer the next-oldest held call.
Repeat as required for any calls on hold at your extension.
NOTE
• If you are using the handset (talk mode) when you
put the call on hold, and you retrieve the call from
hold within one minute, the system returns the call
to you in Talk mode.
If you retrieve the call from hold after one minute, the
system returns the call to you in speakerphone mode.
To convert to talk mode again, simply press the
Speaker button.
• If you are using the speakerphone mode and you
retrieve a call from hold, the system always returns
the call to you in speakerphone mode.