User guide

PROGRAMMING BUTTONS & CODES DX-80/120 Cordless Phone User Guide
- 34 -
Programming Feature Buttons (continued)
4) Press feat at the Select Function display.
5) Press the Func button.
6) Enter the feature code you want to program to this button
(e.g., Func + 6 + # for CID table review).
7) Press
save to store the setting.
HINT
If you make a mistake, use bksp and chg to re-
enter the number.
8) Continue programming other Feature Codes.
AND/OR
9) Lift/replace the handset to exit this programming.
LOOKING UP FEATURE NUMBERS
Use Feature/Directory Number Lookup to find the directory number,
Feature Codes, and Suffix Codes required to operate system
features.
While the phone is idle:
1) Press Func + # + 5 to display:
To find a system Directory Number:
2) Press the
dir soft key.
OR
To find a system Feature Access Code:
Press the
ftr softkey.
• The features are listed abbreviated and alphabetically.
OR
Looking Up Feature Numbers (continued on next page)
FTR CODE: _
bksp save chg
DIR#/CODE LOOKUP
dir ftr suffix