User guide

PROGRAMMING BUTTONS & CODES DX-80/120 Cordless Phone User Guide
- 32 -
PROGRAMMING BUTTONS & CODES
You DX-80/120 Cordless phone has six programmable Flexible
Feature Buttons. You can store any system feature code on any
available Feature Button for one-button operation.
Certain programmed feature buttons light when activated (DND, Call
Forward, DSS/BLF, etc.), while others such as Call Pick-Up,
Background Music, Last Number Redial, do not.
NOTE
Unlike Vertical digital phones that have red/green
LEDs, the cordless phones have red LEDs only.
Features are separated into two distinct categories for programming
onto Flexible Buttons: Directory Numbers or Feature Codes.
NOTE
Before you begin to program a feature code, you
must know the feature code sequence you want to
program to this button.
If you do not know this sequence, first use Feature/
Directory Number Lookup ( Looking Up Feature
Numbers (continued)) to locate the feature and
code you want to program.
PROGRAMMING FEATURE BUTTONS
While the phone is idle:
1) Press Func + # + 3 to enter the Feature Key programming
mode and display:
2) Press the Flexible Feature Button that you want to program.
• The current programming displays:
3) Press the chg soft key to display:
Programming Feature Buttons (continued on next page)
PRESS FTR KEY
F98 __
show chg
SELECT FUNCTION
dir feat