User guide

- 13 -
The DX-80/120 Cordless phone provides two methods for
programming features:
• System Programming
Mode used to program the cordless-specific features of the
phone.
• Function Key programming
Used to program the remaining (non-system) features. This
set of features is identical to those that can be programmed
using the DET phone.
SYSTEM PROGRAMMING MODE
You can easily program the wireless features on your DX-80/120
Cordless by using the programming mode. When you enter the
System Programming Mode, all soft keys are changed to the
following function keys:
• F1 key: UP
• F2 key: DOWN
• F3 key: OK
• Hold key:EXIT
ACCESSING THE SYSTEM PROGRAMMING MODE
1) Press and hold F1 for a minimum of two seconds.
Once in programming mode:
2) Press either F1 (Up) or F2 (Down) until the setting you want
to change appears.
• The setting that is selected will have a "
>
" next to it on the left.
3) Press the F3 button to see the values set for the feature.
DX-80/120 Cordless Phone User Guide
SECTION 2 - PROGRAMMING