User guide

OVERVIEW DX-80/120 Cordless Phone User Guide
- 12 -
Status Indicators (continued)
KEY LOCK MODE STATUS
If you press and hold the Trans key for just over two seconds, the
handset enters key lock/unlock mode.
When the handset is in the key unlock mode (normal mode) and you
hold the Trans key for a few seconds, the unit enters the lock mode.
The LCD displays the following message for three seconds to
indicate how to unlock the phone:
After three seconds, the LCD goes back to being locked ( )and
changes the LCD display to the following:
When the handset is in the key lock mode, and you press and hold
the Trans key, the LCD displays the following message for three
seconds:
If you press the F3 key within three seconds, the handset unlocks.
POWER ON/OFF MODE STATUS
When the handset is on, press the Hold key for a few seconds to turn
the phone off. The LCD displays
POWER OFF for three seconds before
turning completely off.
When the handset is off, press the Hold key for a few seconds to turn
the handset back on. The LCD displays
POWER ON for three seconds as
it comes back up.
NO LINK TO KSU STATUS
After powering on the handset, the handset links with the base station
within approximately one minute. If the base cannot link to the KSU,
the handset displays the following:
LONG KEY PRESS
[TRANSFER]
TO UNLOCK
(( ))
TO UNLOCK?
PRESS [F3]
NO LINK TO KSU