User guide

DX-80/120 Cordless Phone User Guide OVERVIEW
- 7 -
Registering Your Phone (continued)
DE-REGISTRATION
Whether you want to de-register both handsets or remove one
handset only, you can de-register the handsets from the base unit.
However, you must move the handset unit close to the base to
receive the de-registration command from base unit. After de-
registration, the handset unit no longer links with the base.
There are 2 ways to de-register the handset unit:
• using the base only
• using the base and the handset
IMPORTANT!
When deregistering using either method, the
system must be in idle mode. After using either
method, you must remove the power from the base
and re-power on the base.
De-Register Using the Base Only
You can use the base to de-register all registered handsets or only
specific handsets.
To de-register all handsets:
1) Turn off (up) dip switches 1 and 2.
2) Turn on (down) dip switch 3.
• After 5 seconds, the system de-registers all the handsets.
• Now, go to step 3 below.
To de-register Handset #1:
1) Turn off (up) dip switch 3.
2) Turn on (down) dip switches 1 and 2.
• After five seconds, the system de-registers handset #1.
• Now, go to step 3 below.
To de-register Handset #2:
1) Turn off (up) dip switches 2 and 3.
2) Turn on (down) dip switch 1.
• After five seconds, the system de-registers handset #2.
• Now, go to step 3 below.
De-registering Your Phone (continued on next page)