User guide

User Programmable Buttons (On the Phone or Console) 3-61
Using Wave Phone Features
Wave Phone User Guide
SIP AND ANALOG PHONES
To Transfer a Call to Voicemail
While on a call:
1. Press Flash, then #.
2. Press *83.
Hint: You can also press Flash, then press 2.
3. Dial the destination extension.
4. Enter the voicemail hunt group.
Contact your phone System Administrator for a list of hunt groups.
5. Hang up to complete the transfer.
User Programmable Buttons (On the Phone or Console)
The following features can be set on the user programmable buttons:
In addition to choosing which feature is associated with an assigned button, you can also specify
select values for the keys.
Note: Some phones may have a programmed button (usually named “Program”) available for
performing these programming tasks. Contact your Wave System Administrator for more
information about whether or not a “Program” button exists on your phone.
Using Programmable Keys [D]
DIGITAL PHONES
Programming a Feature Button
Note: Not all feature keys are user programmable, thus you cannot edit a button that is not in
the above list. Display the feature information as described above to determine which keys are
available for programming.
In addition, some digital phones have a programmed “Program” button which takes you to the
same location on the display as steps 2 and 3. See “Program Button” on page 6-26
• AutoDial • Extension Pickup • Save/Repeat
•Call Return •Group Pickup •System Speed
• Camp-on • Headset • Unassigned
• Do Not Disturb • Privacy • User Forward
• DSS/BLF • Restrict • Voicecall
Release 1.5 SP3
September 2009