User guide

Transfer 3-57
Using Wave Phone Features
Wave Phone User Guide
Transfer
Transfer places a call on hold while you dial the destination extension number. Your System
Administrator configures the Transfer keys as blind or supervised transfer keys.
Making a Blind Transfer [ALL]
A blind transfer allows you complete a transfer without announcing the party to the destination
extension.
SIP PHONES
To Make a Blind Transfer
While on a call:
1. Press Transfer ( ) to place the active call on hold.
On some models, there is an
XFER softkey.
2. Listen for the dial tone.
3. Enter the destination extension number.
4. Press Transfer ( ) again or hang up.
The party is transferred to the destination extension.
Hint: For 480i/CT, 9480i/CT, 9133i, 9143i and all Aastra Series 5 models: you can also
use the L2 button to make this transfer. See the Hint under Supervised Transfer for details.
DIGITAL PHONES
To Make a Blind Transfer
While on a call:
1. Press TRNS/CONF to place the caller on hold.
2. Listen for the dial tone, then enter the destination extension number.
3. Hang up to complete the transfer.
The party is transferred to the destination extension.
Release 1.5 SP3
September 2009