User guide

Shift (Edge and Impact Phone Models Only) 3-51
Using Wave Phone Features
Wave Phone User Guide
Redialing a Saved Number
To Redial a Saved Number
From an idle phone:
Press Save/Repeat.
The most recently stored number will be dialed.
Storing the Saved Number as an Auto Dial
The Save/Repeat button is intended to be a quick method to temporarily store a number. Only
the number is stored; you are not prompted to enter a name and the value stored is not password
protected.
For numbers that you will used often, programming an AutoDial button is recommended (see
page 3-3).
To Program a Saved Number on an AutoDial Button
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
NEXT until EDIT appears, then press the corresponding button.
3. Follow the prompts to enter the location and the name to be assigned to the
button.
When Number? appears on the screen:
4. Press Save/Repeat.
The number stored at that button will be copied into the AutoDial numbers.
Shift (Edge and Impact Phone Models Only)
The SHIFT button allows you to use programmable keys as AutoDial keys.
Hint: If no keys are pressed, the phone will automatically exit the shift mode after 5 seconds.
Using the Shift Feature [D]
DIGITAL PHONES
To Use the Shift Feature Keys
1. Press SHIFT.
2. Press the feature button associated with the AutoDial number you want to call.
Release 1.5 SP3
September 2009