User guide

Mute 3-44
Using Wave Phone Features
Wave Phone User Guide
• If you have one or more calls connected or on hold, you can place another call by
pressing an available Line or Call Appearance button. You can select one of the multiple
calls by pressing the corresponding button, other calls will be placed on hold. If there is
not an available Line or Call Appearance button, then calls will immediately forward or
will return a busy signal if the call cannot be forwarded.
• If one or more Call Appearance buttons are configured on your digital or SIP phone, it is
recommended that Call Waiting be disabled. This is because it is preferable to use Call
Appearance buttons to answer additional calls to your phone rather than a Call Waiting
button because a Call Appearance button shows the call status on the phone’s display,
while a Call Waiting button does not. Also, once connected you can move easily between
calls by pressing the associated Call Appearance buttons.
Mute
This feature allows you to prevent the caller at the distant end to hear anything through your
microphone or handset during a call.
Note: If the Mute is enabled (on) via the speaker, it will be disabled (off) if you lift the handset
Muting a Call [S] / [D]
SIP & DIGITAL PHONES
To Mute a Call
While on a call:
Press MUTE ( ) to mute the microphone or handset.
The MUTE LED is solid red. You can hear the other party, but the other party cannot
hear you.
To Speak to Your Caller
Press MUTE () again.
The MUTE LED will be cleared.
Release 1.5 SP3
September 2009