User guide

Intercom Button 3-41
Using Wave Phone Features
Wave Phone User Guide
Reconnect to a Call on Hold
1. Listen for the dial tone.
2. Press *65, then #.
Hint: If you are on a call, you may use the Toggle method to switch between the two active
calls.
To End a Call Without Losing Your Call(s) on Hold
You can use the Hold feature to end one call without losing other calls that may be on hold for
you.
1. Press Flash, then 3 to end the current call.
If you hung up, pick up the phone.
2. Press Flash,
then 4 to re-connect to the call still on hold.
If you have multiple calls on hold, you will hear a menu from which you can select the
call to which you want to connect
Intercom Button
Using the Intercom Button [S] / [D]
You can use this button to make calls from your phone to another extension within your phone
system.
Note: To see other call procedures, refer to “Making Calls” on page 2-8.
SIP PHONES (480I/CT & 9480I/CT ONLY)
To Make an Intercom Call
1. Press Intercom ().
2. Dial the extension.
To end the call:
3. Press Intercom (), Goodbye, or the DROP softkey, or hang up.
Release 1.5 SP3
September 2009