User guide

Headset 3-37
Using Wave Phone Features
Wave Phone User Guide
To Forward Your Phone to Another Extension
1. Listen for the dial tone, then press *43.
2. Dial the destination extension.
3. Listen for two beeps and hang up.
To Cancel Either External or Internal Forwarding
1. Listen for the dial tone, then press *44.
2. Listen for two beeps and hang up.
Using Forward (Follow-me)
From any phone in the system, you can specify an extension to which you want your calls
forwarded. Follow the steps shown for digital phones in “Using Forward (Follow-me)” on
page 3-35.
Headset
Using a Headset [ALL]
Follow the procedure below when making and receiving calls using a headset.
Note: If you experience problems using a Bluetooth® device with Wave (you do not hear ring
back or it is distorted, incoming call ring is distorted, dial tone is distorted, and so forth), contact
your System Administrator to verify that you are using a compatible device.
SIP PHONES
1. Ensure that you have selected a headset audio mode by accessing the Options
list (under
OPTION 7.HEADSET SETTINGS).
2. Plug the headset into the jack.
3. Press ( on models 9112i, 9133i, 9143i and all Aastra Series 5 models) to
obtain a dial tone or to answer an incoming call.
Depending upon the audio mode selected from the options menu, a dial tone or an
incoming call will be received on either the headset or the handsfree speakerphone.
Hint: See pages 5-2 through 5-16 for information about phone models and their associated
keys/buttons. Also see “Using the Speaker” on page 2-3.
4. Press End Call. For 480i/CT, 9480i/CT, and all Aastra Series 5 models: press
Goodbye ( ) or use the
DROP softkey to end the call.
Release 1.5 SP3
September 2009