User guide

Forward Calls 3-36
Using Wave Phone Features
Wave Phone User Guide
Programming the User Forward Button
To Program a Number on Your User Forward Button
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
NEXT until PROG appears, then press the corresponding softkey.
3. Press
NEXT until Ufwd appears, then press the corresponding softkey.
4. Press the button you want to assign as the User Forward button.
5. Enter the number.
If you enter an external phone number, be sure to include the external line access digit
(typically 9).
6. Press
Save to store the setting.
7. Press SPEAKER to exit the menu.
To Use the Programmed User Forward Button
1. Press the pre-programmed User Forward button.
If you are prompted for a password:
2. Enter your Voicemail password, then press #.
You will hear two beeps, the User Forward button red LED will flash (indicating that
Forward is enabled), and
FWD is displayed.
ANALOG PHONES
You can have your calls forwarded to an external number (for example to a branch office or your
home) or to another extension within the Wave phone system.
To Forward Your Phone to an External Phone
1. Listen for the dial tone, then press *43.
2. Enter the external line access code.
3. Dial the external (destination) phone number, then #.
4. Listen for two beeps.
If prompted:
5. Enter the appropriate voicemail password, then press #.
Release 1.5 SP3
September 2009