User guide

Dial-by-Name 3-27
Using Wave Phone Features
Wave Phone User Guide
Dial-by-Name
The Dial-by-Name feature allows a call to be placed by entering a name using the keypad or by
scrolling through a list of names. There are two lists of names that can be searched: one of
internal names and one of external names.
About Dial-by-Name [D]
The Dial-by-Name Internal list will include the following numbers:
• Extensions in the database.
• Numbers listed in the Off-premise table.
• Primary Line Appearance Call List (if the calling party number is less than seven
digits).
• Autodial feature keys (if the stored number is less than seven digits).
• System Speed Dial numbers (if the stored number is less than seven digits).
The Dial-by-Name External list will include the following numbers:
• Primary Line Appearance Call List (if the calling party number is seven digits or
more).
• Autodial feature keys (if the stored number is seven digits or more).
• System Speed Dial numbers (if the stored number is seven digits or more).
DIGITAL PHONES
To Use Dial-by-Name
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
DIAL.
3. Press
Int or Ext to specify an internal or external name.
4. Press
First or Last. The name search can be done last name first or first name
first.
5. Press the keypad digit that corresponds to the first letter for the name being
searched.
When the correct name is displayed:
6. Press More, then press Dial to place the call.
If you do not see the correct name right away, you can spell out the name further using
the keypad, or press
Next to scroll through the list.
Release 1.5 SP3
September 2009