User guide
Call Appearance 3-4
Using Wave Phone Features
Wave Phone User Guide
4. Press the ADIAL softkey.
5. Press the button you want to use for the Auto Dial (see step 1 above).
6. Use the keypad to enter the name you want to assign to this button.
7. Press
Next when the name is entered.
8. Enter the number you want to assign to this button.
If you are programming an external phone number, enter the full phone number
(including the external access digit(s) and area code).
You can press the TAP or Flash button to enter a flash at the start of the dialing string (to
use Flash codes). You can press HOLD to insert a pause in the dialing string.
9. Press
Save to store the settings.
10. Press SPEAKER to exit the menu.
To Edit an Auto Dial button
Follow steps 1 and 2 from above.
11. Press
NEXT until EDIT appears, then press the corresponding softkey.
12. Press the AutoDial button you wish to edit.
13. Make the changes to the AutoDial name
14. Use the keypad to change the name.
And/Or
Press
Next to display the number screen.
15. Change the number as needed (see step 8 for programming the Auto Dial button
for details about entering a number).
16. Press
Save to store the change(s).
To Use an Auto Dial button
Press the Auto Dial button assigned to the number you want to dial.
Call Appearance
To handle multiple calls on the same line, your System Administrator can program Call
Appearance keys to work in conjunction with the Line button. For details about Call
Appearance keys used with Line keys, see “Multiple Call Handling” on page 3-43.
Release 1.5 SP3
September 2009