User guide

Using a Wave Phone 2-3
Basic Operation
Wave Phone User Guide
Softkeys
For phones with displays, softkeys are provided that allow you to make selections on the display
when choices are offered (for example,
MENU, VMAIL, and so forth).
Using the Speaker
To Make a Call
1. Press the line or SPEAKER button.
or,
Press ( on models 9112i, 9133i, 9143i, and all Aastra Series 5 models).
Hint: If you have a headset plugged into the phone, this action will then only toggle
between the headset and the handset. The speaker will not be available until you unplug
the headset. Also see “Using a Headset [ALL]” on page 3-37.You can also just start dialing
at this point.
or,
Press ON/OFF (Vodavi Phones).
2. Follow the usual process for making calls beginning on page 2-8.
To Answer a Call
When a call is ringing:
1. Follow the steps above for using the speaker.
2. Follow the usual process for answering calls beginning on page 2-6.
To End a Call (Digital and Analog Phones only)
Press SPEAKER to drop the active call on Vertical digital phones.
or,
Press ON/OFF (Vodavi Phones)
or,
Press the RELEASE button (if programmed).
Note: The button ( button on models 9112i, 9133i, 9143i and all Aastra Series 5
SIP phones) cannot be used to end calls (see “Ending a Call” on page 2-7).
Release 1.5 SP3
September 2009