User guide

Using a Digital Phone 6-25
About Wave Digital Phones
Wave Phone User Guide
On Connected Calls
When you are connected to a call on an outside line, you can use the following phone keys:
Transferring and Conferencing
To transfer (or conference) a caller on an outside line to another outside line:
1. Press the appropriate Transfer/Conference button
2. Dial 9, then the external number.
3. Hang up to finish the connection (transfer or conference).
Display Information
The Edge 100, Edge 700, Impact SCS, and the Vodavi 30-button phone models all provide a
two-line display to give you additional call information. On some models, the display is also
back-lit.
Generally, when you are not using your phone, the display shows the date and time, as well as
the number of messages waiting (if any), a Menu and/or VMail option, station name and/or
number, and so forth The information that appears may vary depending upon the model you are
using, as well as the current status of the phone (for example, during an active call on your
primary line, the other party’s name or the trunk group your call is using is displayed, and call
timer displays the length of time your call is connected).
Note: The display does not show caller ID information on an inbound call if that information
is blocked by the other party, or if your phone service provider does not send caller ID. Instead,
the display shows “Private” or inbound trunk group information.
• Primary, secondary, and other outside line keys
(press to toggle between calls)
• Keypad digits
• Auto dial
•Redial
• Message Waiting\
• Transfer/Conference
(TRNS/CONF, TRANS, CONF)
• DSS/BLF Transfer
Release 1.5 SP3
September 2009