User guide

Impact SCS (8012) - 12 button 6-11
About Wave Digital Phones
Wave Phone User Guide
Feature Keys & Functions
Feature Used to …
1
Handset Answer or place an internal or external call.
2
Speaker Hear the other party during a call without using the handset or headset (Speaker
Mode).
3
Display View information about the options and status of your phone.
4
Softkeys (3) Make selections from the display.
5
Pre-programmed (PGM)
Buttons (12)
Perform special phone functions (pre-programmed by the System
Administrator).
6
SHIFT Button Access a second level of AutoDial buttons.
7
Mute Button Prevent the distant party from hearing any conversation at your end.
8
SPEAKER button Switch to Speaker mode to hear a caller instead of holding the handset.
9
Volume U p () Button Increase the volume of the speaker or the handset during a call.
10
Microphone Speak to a caller when using the speaker instead of holding the handset.
11
INTERCOM Access the primary line.
Note: While this digital phone model has an Intercom button, that button is
used as a primary line button, not for specific “Intercom” functionality.
12
TAP Button Reconnect (or toggle between) calls on hold, during call transfer, and when
creating conference calls. Also, while dialing, pressing this button once will
erase the last dialed digit and pressing it twice will clear all the dialed digits.
13
Volume Down ( ) Button Decrease the volume of the speaker or the handset during a call.
14
HOLD Button Place a call on hold and keep the party connected while you hang up the handset
or use other phone features.
15
TRANS/CONF Button Place a call on hold while you dial the destination extension number when
transferring calls or creating conference calls.
16
Headset (auxiliary) Jack Speak to a caller when using a headset instead of holding the handset.
Release 1.5 SP3
September 2009