User guide

Edge 700 Phone - 24 Button 6-9
About Wave Digital Phones
Wave Phone User Guide
Feature Keys & Functions
Feature Used to …
1
Handset Answer or place an internal or external call.
2
Speaker Hear the other party during a call without using the handset or headset (Speaker
Mode).
3
Flat (Ribbon) Cable Connector
Connect a Bluetooth® or Duplex module.
4
Display View information about the options and status of your phone.
5
Message Waiting Light Indicate when you have a new voicemail message.
6
Softkeys (3) Make selections from the display.
7
Pre-programmed (PGM) Buttons
(24)
Perform special phone functions (pre-programmed by the System
Administrator).
8
Microphone Speak to a caller when using the speaker instead of holding the handset.
9
TAP Button Reconnect (or toggle between) calls on hold, during call transfer, and when
creating conference calls. Also, while dialing, pressing this button once will
erase the last dialed digit and pressing it twice will clear all the dialed digits.
10
TRANS Button Put a call on hold while you dial the destination extension number when
transferring call.
11
SHIFT Button Access a second level of AutoDial buttons.
12
MUTE Button Prevent the distant party from hearing any conversation at your end.
13
Scroll and Select Button(s) Scroll through menu options and select items shown on the display (see page
6-26).
14
Volume Up/Down (-/+) Buttons Decrease/increase the loudness of the speaker or handset while on a call, or the
ringer when not on a call.
15
HOLD Button Place a call on hold and keep the party connected while you hang up or use other
phone features.
Note: If more than one call is on hold, and you are not currently connected to
a call, you can press this button to scroll through a list of calls on hold;
press Tap to connect to the displayed call.
16
SPEAKER Button Switch to Speaker mode to hear a caller instead of holding the handset.
17
Headset (2.5mm) Jack Speak to a caller when using a headset instead of holding the handset.
Release 1.5 SP3
September 2009