User guide

Vertical SIP Phones 480i/CT and 9480i/CT 5-9
About Wave SIP Phones
Wave Phone User Guide
Pairing/Unpairing the Cordless Handset & Base Station (480i/CT &
9480i/CT)
Before using the 480iCT or 9480iCT cordless handset to place or answer calls, the handset must
be paired (registered) to its base station. When successful, pairing adds the handset name to the
handset list on the base and synchronizes the handset list from the base station to the
newly-paired handset. A total of 4 handsets can be paired to a single 480i/CT or 9480i/CT base.
IMPORTANT: When performing the handset pairing or unpairing, the handset be within three
feet of the base station.
Pairing the Handset to the Base Station
On the 480i/CT and 9480i/CT base station:
1. Place the handset being paired within three feet of the base station.
2. Press Options to access the options list.
3. Scroll down the list of options.
4. Select
HANDSET PAIRING.
5. Select
PAIR.
Note: If the maximum number of handsets (4) are already paired to the base station, you will
not be able to select the
PAIR option. If the handset has already been paired successfully, the
softkey will be labelled as
REMOVE instead of PAIR.
On the 480i/CT and 9480i/CT cordless handset:
6. Press .
7. Select
HSET PAIRING on the handset display.
On the 480i/CT and 9480i/CT base:
8. Select DONE.
“Attempting to pair...” will appear on the base display during the process.
On the 480i/CT and 9480i/CT cordless handset:
9. Press the PAIR softkey.
“Attempting to pair...” appears on the handset display during the process.
When pairing is successfully completed,
“Pairing successful” will appear on both the base
and handset displays. If unsuccessful,
“Pairing failed” will appear.
If pairing is unsuccessful, repeat the steps above, making sure base station and handset
are within three feet of each other.
Release 1.5 SP3
September 2009