User guide
Vertical SIP Phones 480i/CT and 9480i/CT 5-7
About Wave SIP Phones
Wave Phone User Guide
Feature Keys & Functions
Feature Used to …
1
Speaker Hear the other party during a call without using the handset or headset (Speaker
Mode).
2
Handset Answer or place an internal or external call.
3
Hold Button Place a call on hold and keep the party connected while you hang up the handset
or use other phone features.
4
Redial Button Place a call to the last phone number you dialed from your phone.
5
Goodbye Button Disconnect the current call.
6
Options Button Access a list of configurable options (such as time & date, ring tone, and so forth.
See page 5-20.
7
Display Provide information about what is happening on your phone.
8
Softkeys (6) Make selections from the display. On this model, one of the softkeys is the Flash
button which is used to access various functions, and work with feature codes.
9
Scroll and Select Buttons Scroll through menu options and select items shown on the display. See page
5-17.
10
Icom ( ) Button Make calls from your phone to another extension within your phone system.
11
Services Button Access the Callers and Directory lists.
12
Microphone Speak to a caller when using the speaker instead of holding the handset.
13
Line Appearance Buttons (4) Make and receive external calls without entering an external access code; one or
more line appearances may be assigned to your phone.
14
Conf ( )Button Set up a call between multiple parties, both internal and external.
15
Xfer ( )Button Place a call on hold while you dial the destination extension number.
16
Volume U p () Button Increase the volume of the speaker or the handset during a call.
17
Mute ( ) Button Prevent the distant party from hearing any conversation at your end.
18
Speaker/Headset ( ) Button Toggle between Speaker and Headset modes to hear a caller instead of holding
the handset.
19
Volume Down ( ) Button Decrease the volume of the speaker or the handset during a call.
20
Headset (auxiliary) Jack Speak to a caller when using a headset instead of holding the handset.
Release 1.5 SP3
September 2009