User`s guide

Page 56 Edge 120 Digital Executive Telephone User Guide
Operation
1. While the phone is idle, press FEATURE . The display
indicates that you are in Feature Key programming mode by
prompting you to press a key:
PRESS FTR KEY
2. Press the Flexible Feature Button that you want to program. The
current programming displays:
F98____
show chg
3. Press [chg].
SELECT FUNCTION
dir feat
4. To program the button, you must know the code type. Use
Feature/Directory Number Lookup to locate the feature and code
you want to program.
4.1. To program a directory number, press [dir].
DIR NUMBER :_
bksp save chg
4.1.1. Input the appropriate directory number and then press
[save]. If you make a mistake, use [bksp] and [chg] to re-
enter the number.
4.2. To program a feature code, press [ftr].
FTR CODE:_
bksp save chg
4.2.1. Press the FEATURE button.
4.2.2. Input the feature code
 (for CID Table review) and
then press [save].
5. Continue programming other Flexible Feature Buttons or
lift/replace the handset to exit this programming.