User`s guide

Page 34 Edge 120 Digital Executive Telephone User Guide
Outgoing Calls
When an idle Call Key is pressed, “NO INCOMING CALL” message
will be shown on the phone display (i.e., Call Keys cannot be pressed
to access available CO lines). However, once a Trunk is seized by an
extension through any means such as: Trunk Directory Number, Trunk
Route Directory Number, or Speed Dial, the first available Call Key will
become associated with that Trunk call, assuming there is no Line Key
programmed for the seized Trunk at the extension.
The Call Key lamp indicator provides status of that Trunk call until that
trunk call is completed at that extension.
Placing Call Key Calls on Hold
A Call Key call can be placed on System HOLD or Exclusive HOLD.
The table below describes the status indicators for both cases (the
descriptions below do not apply to the Hold Key itself (see page 36):
HOLD SETTING DESCRIPTION
System HOLD
(Press the HOLD key)
• A slow flashing green light will be provided on the Call Key
of the holding extension.
• A slow flashing red light indicator will be provided on the
associated Line Key of other extensions in the system.
Other extensions can pick up this Trunk call
Exclusive HOLD
(Press the Feature key
+ HOLD)
• A fast flashing green light indicator will be provided on the
Call Key of the holding extension.
• A solid red light indicator remains on the associated Line
Key of other extensions in the system. Only the extension
which placed this call on "exclusive hold" can retrieve this
Trunk call.
NOTE
• When a user is on a call at Call Key 1, he/she can answer a second call
which is received at Call Key 2. The first call will be put on exclusive
hold automatically no matter whether or not "AUTO HOLD" is enabled.
• When a trunk call(s) is placed on hold and there is no Line Key or Call
Key at the extension, the phone will ring to remind you to retrieve the
held call(s).