User`s guide

Page 10 Edge 120 Digital Executive Telephone User Guide
Operation – Establish a Four-party Conference
1. First establish a three party conference (per above).
2. Press HOLD.
3. Place the third call (internal or external).
4. Press the CONFERENCE button. The connections are joined
together.
(Four parties include the initiator {Controller} of the conference.)
5. Hang up to end the Conference.
Operation – Establish an Unsupervised Conference
1. First establish a conference (per above) with two or three outside
lines.
2. Press FEATURE
. The Unsupervised Conference is
established and your extension is returned to idle.
Operation – Rejoin an Unsupervised Conference
1. Press FEATURE .
2. Your extension is rejoined to the conference connection.
Operation – Force Release a Conference Member
(Conference Controller only)
1. While engaged in a conference the display shows:
XXX XXX XXX
private forced
2. Press [forced].
PRESS DIR#
exit
3. Press [exit] to abort the operation and return to the conference.
Or…
3. Dial the directory number (outside line number or Extension
number) to release. (You may also simply press the outside line
button or DSS button of the outside line/extension to be
released.)
4. That conference member is disconnected and you are rejoined in
conference with the remaining members.
5. Hang up to end the Conference.