Specifications

- 89 -
DX-120 Installation and Maintenance Manual ACCESSING PC-DBA MAINTENANCE
Maintenance Utilities (Menu Items)
• Configuration (see below)
• Diagnosis
• Status
• SW/HW Revision
• Event
• Logon Data
• Remote Control
• T1 Maintenance
IMPORTANT!
• Remember, in order to access these utilities, there must be an active
connection between PC-DBA and the DX-120 switch (see
See “Connecting
PC-DBA to the DX-120 Switch” on page 84.)
• Refer to the HINT under step 6 on page 85 regarding the CTS indicator that
appears once connection has been established.
CONFIGURATION
When you select Configuration, the DX-120 processor sends the current hardware configuration to PC-DBA for
viewing. For each board viewed, the board type is displayed so that the hardware can be readily identified.
From the main PC-DBA Screen (during connection between the system and the switch - see page 84):
1) Go to MaintenanceXConfiguration to display the Configuration screen.
• A message will appear to let you know that the configuration information is being transferred from
the switch and being received by PC-DBA.
2) Click on any button on this screen to display configuration details about the corresponding board.
Configuration (continued on next page)
A message will appear to let you
know the information is being
received/transferred.
This screen will appear after the
transfer is completed.