Specifications

INSTALLING THE DX-120 DX-120 Installation and Maintenance Manual
- 62 -
Installing the KSU2 (continued)
8) Position the KSU2 connection cable over the CPM-“2
nd
Cabinet Connector” as shown below.
HINT
Press firmly (but not forcefully) on the KSU2-Cable connector to secure a good
connection into the CPM-2
nd
Cabinet Connector.
9) Replace the KSU cover and secure with cover screws.
10) Restore KSU power by powering both KSU cabinets at the same time.
11) Flip both cabinet power switches to the “ON” position simultaneously.
CAUTION
You must turn on both cabinets at the same time. Failure to do so can
result in damage to the KSU1 and potentially the KSU2.
CPM
2nd Cabinet Connector
Cable from KSU2-408E