Specifications

TROUBLESHOOTING INSTALLATION ISSUES DX-120 Installation and Maintenance Manual
- 116 -
What to Do if a Normal Cold Start/Restart Is Not Possible (continued)
12) Press HOLD to return to the previous menu level.
OR
Press the Up or Down Volume arrows to return to the database Item
13) Return to the Selection screen.
Checking the UCD Assignment for the Voice Mail Hunt Group
14) Enter 06-02-(1~3)-01.
• The range of numbers in the middle of this command represent the tenant group number
(usually 1).
15) Press save to display the Voice Mail Table for Tenant 1 – Hunt Group.
16) Press chg until the UCD group you want to use as the VM hunt group displays (i.e., new UCD Group
selected and programmed with digital channel members.)
17) Press next to continue programming the various call handling digits (Prefix/Suffix).
18) Press HOLD to return to the previous menu level.
OR
Press Up or Down Volume arrows to return to the DB Item
19) Exit programming.
20) Test to see if these changes have corrected the problem.
IMPORTANT!
If the procedure described above does not resolve the problem with
voicemail, you MUST re-initialize the system. See “Adding Hardware to an
Existing System” on page 113.