Specifications

ACCESSING PC-DBA MAINTENANCE DX-120 Installation and Maintenance Manual
- 100 -
SW/HW Revision (continued)
IMPORTANT!
• Once you receive the information into the PC-DBA, then click Save, the
information will appear any time you open this screen. However, you will need
to perform a SEND to update any revisions that may have been made.
2) Edit information as needed.
3) Click Save to store the new information.
4) Click Send to send the new information back to the switch.
• The next time you use this feature, the last saved information will be displayed.
EVENT
• You can invoke event tracking to record actions the system processes, for the purposes of debugging the
system. This operation is rarely required and usually used following a request by the customer service
department to do so. The output data is presented to the SMDR serial port.
NOTE
The data must be collected in a dedicated collection PC using special Event
Tracking software, or a terminal emulation software that writes to a text file, for
later deciphering at customer service.
• Event tracking can be started and stopped by a specified system operation, or set to continue until manually
discontinued.
Event (continued on next page)