Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 86 -
Establishing Music Sources (continued)
ESTABLISHING MUSIC SOURCES VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
Program the Music Directory Number Length
(the number of digits in the extension you will use to access the music sources)
4) Enter 08-09-09-01.
5) Press save.
6) Press chg to select the number of digits in the extension you will use to access the music sources.
• Valid selections are 1, 2, 3, or 4.
• The default is 3.
7) Press save to store the setting.
8) Press the Volume button (up or down) to return to the DB Item Selection screen.
Program the directory number of the extension you want to use for the first music source
9) Enter 08-09-09-02.
10) Press save.
11) Press chg.
12) Enter the appropriate directory number.
• Valid directory numbers include any available, non-conflicting directory number.
• The default is 771.
13) Press next.
• Repeat steps 10 through 13 for each of the remaining music sources (i.e., Leading 2 and 3) you want to
program.