Programming instructions

BASIC SYSTEM PROGRAMMING TASKS DX-120 Programming Manual
- 82 -
Establishing Loud Bell Settings (continued)
ESTABLISHING LOUD BELL SETTINGS VIA THE DET
NOTE
• chg, bksp, save, one, always, del, and ack are interactive LCD button operations.
Use the three buttons below the LCD display to activate the associated operation.
• You can press Hold at any time to return to the previous level or press the volume
buttons to return to the main DB selection screen.
1) Enter Database Administration (see page 26) using the feature code Feature # * to display the password
prompt.
2) Enter the DB Admin password (see page 27).
3) Press show to display the DB Item Select screen.
4) Enter 04-13-1.
5) Press save to advance to you to the Loud Bell – Application programming field.
6) Press chg to select L.B., M.S.1, M.S.2, or E.P.
- L.B. (loud bell) - this is the default setting
- M.S.1 (music source 1)
- M.S.2 (music source 2)
- E.P. (external page)
- DIR (loud bell control -- users can dial loud bell number to close relay until they hang up)
7) Press next to specify which CO line groups you want to use the ancillary device.
8) Press chg to activate/deactivate the device for each CO line group.
9) Press the Hold button to return to the previous menu level.
OR
Press the Volume button (up or down) to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).